We've all burned CDs of our mixes so that we can listen to our latest creation on as many different systems as we can: the living room HiFi, the television, our friends' studio monitors and so on. Then the process of improving the mix based on what we've heard begins. We might burn another CD to check the updated mix on the same systems in the hope that it sounds better second time around. We may not realize it but we are now reference mixin. This is why most studios have multiple pairs of speakers; so the engineer can reference the mix on more than one monitor. For most of us this is tough, due to space or budget constraints.
Introducing VRM Box. The high-quality USB headphone interface with a difference. VRM stands for Virtual Reference Monitoring. It gives you the option of listening to your mix on multiple sets of speakers, in different rooms, just using headphones. This helps to overcome the problems associated with creating a mix that translates well on many speakers. Burning CDs to listen to your mix in different environments will become a thing of the past.
- Three virtual rooms and 15 virtual speakers
- Use alongside any interface
- High-quality monitoring anywhere
- A great upgrade for headphone listening
|Headphone Outputs (Outputs 1-2)|
|Output impedance||< 10 Ohms|
|Power output into 150 Ohms||15mW|
|Power output into 50 Ohms||30mW|
|THD+N||-100dB (0.001%) (-1dBFS input, 20HZ/22KHZ bandpass filter, 150 Ohms load)|
|Signal to Noise Ratio||> 105dB|
|S/PDIF Digital Input|
|Supported sample rates||continuous from 32KHZ to 192KHZ|
|THD+N||< -110dB any sample rate|
|Crosstalk (Channel Isolation)|
|Any output to output||> 100dB|
|D/A Dynamic Range||120dB (A-weighted)|
|Measured D/A Dynamic Range||108dB (A-weighted)|
|Clock Source||Internal Clock only Clock jitter < 250 picoseconds|
|Supported Sample Rates||44.1kHz & 48KHZ|
|Input channels to computer||S/PDIF (stereo)|
|Output channels from computer||Headphones (stereo)|
|Unboxed||68mm x 25mm x 68mm (W x H x D)|
|Boxed||155mm x 210mm x 75mm (W x H x D)|
Three virtual rooms and 15 virtual speakers
Monitor in a virtual professional studio, living room or bedroom. With 15 different speaker models, you get multiple perspectives on your mix. From the Genelec 1031A, to the KRK VXT8 and the BBC-designed LS3-5a, we have meticulously measured each of the speakers to bring their characteristics to your headphones. There’s even an LCD television to use for reference!
Use alongside any interface
VRM Box can be used in conjunction with any interface that has an S/PDIF output, including Pro Tools HD and Pro Tools HD Native. This makes switching between VRM headphone monitoring and speaker monitoring painless. VRM Box can receive S/PDIF signals at any standard sampling frequency (44.1 to 192 KHz) meaning you don't need to change your session setup – just route your mix to the S/PDIF out.
High-quality monitoring anywhere
Sometimes it’s not possible to take your interface with you, as it’s too large or because it’s wired into your studio. The portable format of VRM Box allows you to take it anywhere – just sling it in your laptop bag and be safe in the knowledge that its robust case will stand up to the rigors of the road. It’s even bus powered so all you need is the USB cable.
A great upgrade for headphone listening
If you like to listen to music on your computer with headphones, VRM Box provides a great improvement when compared with on-board sound and indeed many other audio interfaces. With a dynamic range of 108 dBA and very low noise and distortion figures, VRM Box delivers pristine sound with or without the optional room and speaker modelling.
Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!