ATI MXS-100 Stereo 3-Channel ENG Field Mixer with Limiter, Low Cut Filter, Slate Mic and Test Tone

From the ATI Audio NanoAmp series, the MXS100 is a rugged 3-channel field audio mixer designed for microphone and line level audio mixing in Electronic News Gathering (ENG), Field Production (EFP), event video capturing and more.

3 balanced XLR inputs accept microphone or line level signal while maintaining high audio fidelity and low noise floor. The output stage features stereo balanced XLR connection. A TRS 1/4" headphone output enables accurate monitoring of input signal. The MXS100 features internal jumpers that assign phantom power to desired inputs, a 10-segment tri-colored LED audio meter provides accurate level reading.

Features:

3 Mic & Line Inputs on balanced low noise XLR microphone and line level switchable inputs.
1/4" TRS headphone output with variable VCA gain control provides accurate signal monitoring.
Low cut filters, slate microphone, stereo tape in and output and a test tone oscillator
Peak Limiter Switchable peak limiter protects input against distortion.
20VDC phantom power can be individual assigned to desired inputs using internal jumpers.
Tri-colored 10-segment audio meter provides accurate level monitoring. The bright display is visual in sunlight.
Expand with an XPS100 to add four switchable microphone/line inputs with pan pots, or combine with the XPS200 to add two stereo line level inputs . Each input gain knob has a concentric pan control

OUTPUT LEVEL	+22dBm MAX, +4dBm Nominal into 600 ohm balanced or unbalanced lines; output is selectable +4dBm (Line) or -50dBm (Mic)
FREQUENCY RESPONSE	+0/-0.3dB, 20Hz to 20kHz
DISTORTION	.5% Maximum, 20Hz to 20kHz at +20dBm
NOISE	MIC Input: EIN = -126dBm; Line: EIN = -86dBm; 20Hz to 20kHz measurement bandwidth
GAIN	Mic inputs: +82dB Max; Line Inputs: +42dB Max
HEADPHONE OUTPUT	100mW to 600/150 Ohm phones, 1/4 inch TRS (stereo) jack
LIMITER	5:1 slope, Attack time 25ms, Recovery time 200ms for 10dB change (MXS100 and MX200C only)
PHANTOM POWER	+24VDC nominal @ 4ma through paralleled 6.8K ohm resistors; PH48-1 48VDC phantom power is available as an option (please specify)
POWER	22 to 30 VDC, 24VDC nominal; MX @ 160 mA, XP @ 100 mA; See Accessories for other DC voltage options
DIMENSIONS	1.75" (4.45cm) H x 5.6" (14.22cm) W x 5.75" (14.6cm) D; 1.25 lbs. (.57kg)
MOUNTING	Free standing or rack mountable: one, two or three units in 1RU (1-3/4")
CONNECTORS	Standard XLR female inputs and XLR male outputs
TAPE	Monitor input and tape output, 3.5mm stereo mini jacks (MXS100 only)
POWER SUPPLIES
WA100-1 (standard)	Wall mount power supply (UL, CSA), 24VDC @ .4amp, 115 VAC/60 Hz
WA100-2 (optional)	Table top power supply with IEC 320 AC connector, 24 VDC @ .4amp, 230/50 Hz
AVAILABLE REMOTE POWER PACKS
PPA-1	Rechargeable battery pack (includes charger)
PPA-2	Rechargeable battery pack, mounts directly to the base of the NanoAmp mixer
DCA100-1	DC/DC converter for operation with DC inputs from 6 to 18VDC
BBU100-1	Battery pack, houses four 9V alkaline batteries for remote operation
FIELD ACCESSORIES
ABAG-1	Carry Case (includes PROK-1), houses Mixer with PPA-1,-2,-3 or DCA100-1
PROK-1	Unit protection kit containing side plates to protect front panel controls and rear connectors from impact damage; includes slide-out brackets for BBU
RACK MOUNT KITS
21075-501	1U Rack Mount Shelf, holds up to 3 NanoAmp units
DESK MOUNT KITS
20617-501	Angled desk mount base
20617-502	Angled desk mount base and one stacker, holds 2 NanoAmps
20617-503	Angled desk mount base and two stackers, holds 3 NanoAmps
20617-504	Stacker only, holds 2 NanoAmps
20617-505	Horizontal joiner, holds 2 NanoAmps side-by-side
WARRANTY	Limited One Year Warranty

Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!