ATI PB2X8 2x8 XLR Mic/Line to Line Distribution Amplifier + Press Box

The PB2X8 from ATI Audio is a high-quality rack mountable distribution amplifier ideal for press box and other professional applications. It features two mic/line switchable XLR inputs with phantom power, and eight isolated line-level outputs. You can set each output to input A, input B, or a mix of both inputs for terrific versatility.

For system and level checks, you can switch a calibrated test tone oscillator in place of either input. Each output has an independent level control and a transformer-isolated XLR connector. A pair of 1/4" TRS jacks are provided in parallel to the XLR inputs for convenient loop-thru for system expansion. A ground-lift switch is provided to help minimize hum cause by ground loops.

Features:: • Rack mountable; • Two mic/line XLR inputs with phantom power and low cut filters; • Eight transformer-isolated XLR outputs with individual level controls; • Each output can be set for input A, input B, or a mix of the two; • A calibrated test tone oscillator can be switched in for either input to perform system tests and level checks; • Bar graph LED display shows any of the eight outputs or either input; • Two 1/4" jacks in parallel with the XLR inputs provide convenient loop-thru for system expansion; • Ground-lift switch for minimizing hum/font>

OUTPUT LEVELS	XLR: +4dBm nominal, +22dBm maximum TRS: -10dBu (.25V), balanced or unbalanced, -50dBu internally selectable.
INPUT LEVELS	Microphone: -50dBm nominal form 50 to 600 ohm mic. Line: +4dBm nominal, -10dBu internally selectable.
DISTORTION	.25% maximum THD, 30Hz to 20,000kHz at +22dBm output.
RESPONSE	+0, -.25dB, 30Hz to 20,000kHz
NOISE	Mic. Inputs: -124dBm EIN, 20Hz to 20,000kHz Line Inputs: -94dBm EIN, 20Hz to 20,000kHz
MIC FILTERS	Two pole active switched, 150Hz, low cut.
PHANTOM MIC POWER	+48VDC, rear panel switch.
HEADPHONE OUTPUT	.2W into 150/600 ohm stereo TRS headphones.
TEST OSCILLATOR	1kHz at internal buss levels equivalent to nominal input and output levels
CONNECTORS	XLR type, 1/4 inch TRS, 3.5mm TRS
size	In (MM) 17 (432) W X 1.75 (44.5) H X 10.5 (267) D 15 lbs. (6Kg).
MOUNTING	Suction feet for non-slip desk mounting. Rack mounting angle brackets included.
POWER	115/230VAC +/-10%, 47 to 63 Hz, 10VA.
WARRANTY	Limited, One Year Warranty

Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!

Dale Pro Audio

Free Shipping Offer

Qualifying items have this graphic:

Restrictions

ATI PB2X8 2x8 XLR Mic/Line to Line Distribution Amplifier + Press Box - Parallel XLR + TRS Outs

Also Popular:

Customer Service

Policies

About Dale Pro Audio

Categories