The Bryston 2B-LP amplifier is a compact, high quality 60 watt per channel, (8ohms), stereo amplifier intended for use in home sound systems requiring a musically accurate, extremely reliable, no compromise power source. While the 2B-LP has for years been thought of as an exceptionally lucid and transparent amplifier for traditional two-channel stereo setups, it is now finding additional acceptance in such installations as multimedia surround-sound systems, and in the most ambitious music systems with multi-amplified speakers using electronic crossovers.
Features include: Completely separate stereo channels, including dual power supplies, to prevent any interaction between left and right signals, for precise soundstaging and image quality. Green/red power/clipping lights to give immediate indication of any overload or fault condition. Rear-mounted ground-lift switching to avoid potential ground loops and system hum. Gold plated five-way binding posts and gold plated RCA connectors to prevent any possibility of long term corrosion or connector distortion. Finally, higher power monaural operation is as easy as the flick of a rear-mounted stereo/mono switch.
Bryston exclusively uses only the finest components in our designs, such as 1% metal-film resistors, polystyrene capacitors and hand-matched transistors to reduce noise and distortion to the absolute minimum. All signal circuitry is fully discrete to avoid the compromises, phase shift and nonlinearities inherent in IC's. Bryston applies techniques and employs custom materials in our everyday construction of electronic equipment which are more typically found in military and aerospace industries.
|Power Output||60 watts per channel. 8 ohms |
100 watts per channel 4 ohms
200 watts, bridged. 8 ohms
|Gain||28.28 or 29dB|
|Less than 0.01% from 20Hz to 20kHz at 60 Watts|
|IM distortion||Less than 0.01% from 10 milliwatts to 60 watt|
|Noise||100dB below full output|
|Crosstalk||Below noise 20Hz to 20 kHz at 60 Watts|
|Slew Rate||Greater than 60 volts per microsecond|
|.5Hz to over 100kHz|
|Damping factor||Over 500 at 20Hz. ref. 8 ohms|
|Input Sensitivity ||0.775 Volts in = 60 Watts at 8 Ohms |
|Input Impedance||20 Kohms balanced|
|Features||Bridging switch Ground lift switch Over 1600 cm/square of heatsinking;|
over 3200 cm2 with chassis Regulated power supply to all voltage gain stage Each channel separated back to the linecord Channel clipping indicator
Green = normal levels, Red = clipping Will deliver full output to any phase angle at 4 ohms or higher Gold-plated combo 1/4 inch/XLR jacks
|1. Idle Current||58W|
|2. Stereo 8 Ohms (50W ea.)||286W|
|3. Stereo 4 Ohms (100W ea.)||498W|
|4. Bridged 8 Ohms (200W)||504W|
|5. Max. Wattage||504W|
|6. Max. Heat Dissipation||304W / 1037 Btu/Hr|
|Warranty||20 years parts labour, shipping one way|
|Dimensions||19 x 1.75 x 10 inches, wt: 18 lbs|
48.25 x 4.44 x 25.4cm, wt: 8kg
Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!
Product Rating: (0.00) # of Ratings: 0 Click Here to rate this product|
There are no comments for this product. CLICK HERE to be the first one to share your opinion!