Clear-Com RS-603 2-Channel TW Dual Listen Mono Aural Beltpack 4-Pin Male Headset Connector

Clear-Com designed the 600 series of beltpacks to meet the needs of all beltpack users, from beginners to experienced professionals. For advanced users, the 600 series provides the most advanced level of functioning available. Dual channel with 3-pin female and male XLR, 4-pin male XLR headset connector, 2.5 mm AUX headset connector and an RS-232 connector. Onboard switch selects loop through connector as audio program in. Separate volume control sets program levels. RTS line compatible. AC call signaling on both channels; DC call signaling on Channel B (reversible). Channel exclusive allows use as a single channel beltpack. Requires a TWC-701 or TWC-704 (sold separately) for two-channel operation.For use with Clear-Com TW products and a monaural headset.

Features:

Rugged, compact design
Full compatibility with all existing Clear-Com party-line systems
Four setup configurations that you can activate directly from the beltpack

Extra 2.5 mm cell-phone type headset jack

Advanced setup options with V-Pack software

Two intercom channels

Local input for program audio

Program audio volume control

3-pin male XLR intercom connectors

Choice of headset jacks for use with Clear-Com-TW or RTS-TW systems, monaural or binaural audio

General
Amplifier Design	I.C. amplifiers, including solid-state digitalswitching and signaling circuits. Current-limited and short-circuitprotected.
Signal to Noise	>75 dB
Bridging Impedance	>15k
Line Level	-14 dB, +5 dB max.
Sidetone Adjust	>35 dB
EMI and RFI rejection	>60 dB
Microphone Pre-Amplifier
Headset Mic Impedance	200 ohms
Gain, mic to line	41 dB (dynamic)
Limiter Range	26 dB
Frequency Response	200 Hz – 12 kHz contoured for intelligibility
Program Input
Program input	Balanced, transformer isolated
Input sensitivity	–20 dBv to +10 dBv
Frequency response	50 Hz – 18 Hz, ± 2 dB
Headphone Amplifier
Load Impedance	50 - 2,000 ohms
Output Level	+17 dBv before clipping
Distortion	<0.1% THD @ 1 kHz
Gain, line to output	+34 dB
Frequency Response	100 Hz - 18 kHz, ±2dB
Connectors
Intercom Line	(2) 3-pin XLR–M–F
Headset	4-pin XLR–M
Power Requirements
RS-603	55mA quiescent; 62mA average talk; both channels simultaneously ;50mA talk with signaling both channels simultaneously
DC Voltage Range	12-32 volts
Environmental
Operating Temp. Range	0°C - 70°C (32°F - 158° F)
Humidity	0 - 90% relative humidity
Dimensions	4.58"H x 3.73"W x 1.34"D (116 x 95 x 34 mm)
Weight	1 lb

Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!

Dale Pro Audio

Free Shipping Offer

Qualifying items have this graphic:

Restrictions

Clear-Com RS-603 2-Channel TW Dual Listen Mono Aural Beltpack 4-Pin Male Headset Connector

Customer Service

Policies

About Dale Pro Audio

Categories