BNC panel mounting jack.
The bulkhead connector offers a true 75 Ohms design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use.
Isolated bulkhead jack, solder version
- Gold plated center contact
- True 75 Ohms design meets the stringent HD requirements
- Isolated panel mount (solves potential grounding problems and prevents common-mode influence with other connections conducted over the same panel ground potential)
- Grounded panel mount possible (remove isolation washer)
The minimum order quantity for this item is 100 pieces.
|Connector Type ||BNC 75 Ohm|
|Gender ||female |
|Signal Type||HD,SDI,Video,AES/EBU,Composit,YUV,RGB,RGBH,RGBHV |
|Contact resistance ||≤ 3 mOhms (inner) |
|Dielectric strength||1,5 kVdc |
|Impedance ||75 Ohms |
|Insulation resistance||> 5 GOhms |
|Rated voltage ||500 V |
|VSWR ||≤ 1.03 / > 37 dB up to 1 GHz, ≤ 1.05 / > 32 dB up to 2 GHz, ≤ 1.08 / > 28 dB up to 3 GHz |
|Cable retention force ||> 50 N |
|Insertion force||< 25 N |
|Lifetime ||> 1000 mating cycles |
|Wiring ||solder contact |
|Locking device||Bayonet |
|Mounting direction ||front |
|Chassis shape ||12.7 mm |
|Contacts ||Brass (CuZn39Pb3) (Ground contact) |
|Contacts ||Brass (CuZn39Pb3), 0.2 µm AuCo (Center contact)|
|Insert ||Teflon PTFE |
|Shell ||Brass (CuZn39Pb3) |
|Shell ||Polyacetal Polyacetal (POM) (Insulation Sheell) |
|Shell plating ||Optalloy® |
|D-Shape housing||Zinc diecast (ZnAl4Cu1) gal Ni plating |
|Standard compliance||IEC 6016908, MIL 348A |
|Temperature range ||-30 °C to +85 °C |
Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!
There are no comments for this product. CLICK HERE
to be the first one to share your opinion!