Now videographers can use true 'studio' stereo recording techniques in the field with ease. The X/Y configuration enables the StereoVideoMic to capture the true ambience of the recording space, while still offering a high level of rear rejection and low noise. Fitted with a shoe mount, the StereoVideoMic has the same low noise circuit design as the best selling VideoMic.
FEATURES:
- Stereo X/Y Condenser Microphone
- Broadcast Sound Quality
- Low Noise Circuitry
- Two step High-Pass Filter - Flat or 80Hz
- Rugged cast aluminium body
- Custom designed integral windshield
- Low handling noise
- 9V battery powered
- Integrated camera-shoe mount
| Power | 9V battery powered |
| Acoustic Principle | Pressure gradient |
| Directional Pattern | Super Cardioid |
| Frequency range | 40 Hz - 20 kHz |
| Output impedance | 200ohms |
| Signal noise ratio | 74 dB SPL (A - weighted per IEC651) |
| Equivalent noise | 20 dB SPL (A - weighted per IEC651) |
| Maximum SPL | 134dB SPL (@ 1kHz, 1% THD into 1Kohms load) |
| Sensitivity | -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz |
| Weight | 176gm |
| Dimensions | 65mmH x 170mmW x 102mmD |
The StereoVideoMic offers 9V battery operation, an LED battery status indicator, high pass filter switch, and a -10dB pad switch which allows for the mic to be used on most cameras with perfect level control. You can also use the StereoVideoMic as a remote mic on a stand, or a RØDE boom pole (optional), which truly makes this versatile product well suited for all video applications including Electronic News Gathering (ENG), Weddings, Sports Events & Interviews.
SVM Controls:Now that you have the SVM securely fastened to your camera and the audio output lead connected, you can switch the mic on. There are three switches located on the end of the mic body a Pad (with 0 and -10dB level cut), an On-Off switch, a High Pass Filter with which you can use to remove rumble or other low frequency noise while recording. It will affect the tone slightly but in some situations it is required. A power indicator LED fl ashes RED for 0.25 sec. when the mic is fi rst turned on. This changes to GREEN indicating the battery has adequate charge. When the battery runs low, the LED will change back to RED and you should change the battery for a fresh one.
SVM Windshield:The SVM comes with a custom designed windshield. The windshield should be left on at all times as even the slightest breeze can cause sound interference.
General Operation:SVM is not designed for long distance pick up. I have heard people ask, “How far away can this mic pickup sound?”. Of course you can boost the gain level on your camera and you will hear more defi ned sounds over a longer distance than with conventional microphones, but you will also get a lot of ambient noise and refl ections making it sound hollow. For best results you need to be within 6’ (2m) of a person talking. If you want very clear dialogue, you will need to have the mic position close to the person you are recording and use an extension mic cable which we supply as an accessory.
Dale Pro Audio guarantees that our prices will be competitive and that shopping with us will always be a great value.
If you've found a deal that looks better than ours, we want to hear from you!
Product Rating:  (0.00) # of Ratings: 0  Click Here to rate this product
There are no comments for this product. CLICK HERE to be the first one to share your opinion!
|
|